The Active Hands Co Ltd
Manufacturer's Product Description
The Soloc Uno is a seatbelt solution for one-handed users. This might be due to a stroke, limited mobility or a limb difference.
How does it work?
The FlexiFix arm holds the buckle of the seatbelt in a ‘ready’ position, allowing you to bring the stud side to it and connect easily. The buckle closes with ease with the help of a magnet, which activates a physical connection in the buckle. Simply tighten the belt by pulling on the D-ring, in the same way you would usually tighten a lap belt.
To release the belt, simply push against the small lip or pull the pull tab. This allows users with limited hand function to release their buckle independently.
The FlexiFix arm remains in an upright position when the belt is not in use, making transferring in and out of the wheelchair much easier!
What sizes does the Soloc Uno come in?
The FlexiFix arm of the Uno belt is one-size. There several fixing holes to choose from, depending on the length needed. You can also purchase an extender plate to add up to 120mm.
The belt can be adjusted to fit on the webbing side of the belt, where it attaches to the chair. To fit this side of the belt, you will need to allow enough extra webbing to bring the stud side all the way to the buckle. You also have adjustability at the centre of the belt, by the buckle, this is suitable for daily adjustments for different types of clothing, etc.
The Uno belt is available with either 600mm or 700mm total padding. The minimum length of the belt with the 600mm padding is 720mm and the maximum is 1500mm. With 800mm padding, the minimum length is 820mm and maximum is 1500mm.
If your wheelchair doesn’t have holes already cut into the frame you can use one or more of our fixing options:
- The tubular frame clamp works with the webbing belt side of the Uno and slots into the Tri-plate.
- The frame saver clamps work with both sides and come as a pair.
- If you need more length in the FlexiFix Arm side of your belt, an extender plate is available.
All Soloc belts are tested to ISO 16840-3 and ISO 16840-10 and are CE and UKCA marked.
Manufacturer's Contact Details
The Active Hands Co Ltd
Unit 4, Rumbush Farm,
322A Rumbush Lane,
Earlswood,
Solihull
B945LW
England
01564702255 info@activehands.comKey Features
No Key Features have been specified for this product
Product Dimensions
No dimensions have been specified for this product
Product Specification
No product specification has been specified.
Need More Help?
If you know that there is a certain product that will help you, feel free to browse through our online catalogue or use our search tool for specific product names. National retailers are listed against each product and you can click on their link to go directly to their website to order that product or contact the retailer for more information. Don't forget to tell them you found their information on our site.
If you are unsure about what you need why not try our AskSARA tool to narrow down your search by considering what areas of daily living you need help with.
If you would prefer to speak to someone for advice about daily living equipment, please contact our Helpline on 0300 999 0004.
Our experienced advisors will help you find the solution to your problem and can send you information on products that might help you, where you can buy equipment and other useful organisations that might be able to help you.
You can also post a question on the Youreable forum. it’s free to join the forum and the community is supportive and knowledgeable. The forum is an online community of and for disabled and older people and their families/carers.
back to top